What is open-to-buy planning, and how does it work in fashion retail?

Open-to-buy planning on laptop

Open-to-buy (OTB) is the value of new inventory a buyer can still commit to during a specific period. It is what remains after you subtract what you have already committed from what your plan says you should receive. In fashion retail, where most inventory is seasonal and cannot simply be reordered once the season has passed, it is the figure that governs what arrives and when. 

The American Marketing Association defines open-to-buy as planned purchases for a period, less receipts and merchandise on order. That subtraction is the working part of the definition. Planned purchases come first. Open-to-buy is what is left after commitments are counted. 

Why this matters in practice: a buyer who has placed $200,000 in purchase orders against a $250,000 planned-purchases figure has $50,000 of open-to-buy remaining. That $50,000 is the only room for new receipts in that period without revising the plan. 

How is open-to-buy calculated? 

Open-to-buy is calculated from a small set of inputs that a merchandise plan already holds. The formula is usually built at retail value and then converted to cost. 

Planned purchases come first 

Before you can calculate open-to-buy, you need planned purchases: the total value of goods a category needs to receive in a period to meet its sales, markdown and ending-inventory targets. 

Planned purchases (retail) = Planned sales + Planned markdowns + Planned end-of-period inventory − Beginning-of-period inventory 

This is the ceiling, the value of goods that should arrive in the period if the plan holds exactly. 

Open-to-buy (retail) = Planned purchases − Merchandise received − Merchandise on order 

Open-to-buy is the room left under that ceiling once commitments are subtracted. Some guides label the planned-purchases formula as open-to-buy, but the two answer different questions. Planned purchases tells you how much you need. Open-to-buy tells you how much you still have room to buy. 

Converting to cost 

Buyers place orders at cost. The conversion uses the initial markup percentage (IMU): 

Open-to-buy (cost) = Open-to-buy (retail) × (1 − IMU%) 

If OTB at retail is $100,000 and IMU is 55%, OTB at cost is $45,000. That is the figure that appears on purchase orders. 

What each input represents 

Input What it means in practice
Planned sales The sales target for the period, by category
Planned markdowns The price reductions planned for the period
Planned end-of-period inventory The stock needed to open the next period
Beginning-of-period inventory Stock on hand at the start of the period
Receipts to date Goods already delivered in the current period
On order Purchase orders placed but not yet received

The planned sales, markdown and inventory targets come from the merchandise financial plan. The receipts and on-order figures come from purchase order and receiving records. Both need to be current for the OTB figure to be usable. How open-to-buy draws on the stock record is covered in our guide to merchandise planning versus inventory management. 

How to calculate open-to-buy: a worked example 

The formula is clearest with numbers. This illustrative example follows a women's knitwear category through October, worked three ways: the figure at the start of the month, a mid-month recalculation when sales run ahead of plan, and the conversion to cost. 

Step 1: Open-to-buy at the start of October 

At the start of October, the plan shows: 

Item Retail value
Planned sales (October) $180,000
Planned markdowns (October) $20,000
Planned end-of-month inventory $300,000
Beginning-of-month inventory $260,000
Planned purchases $240,000

Planned purchases = $180,000 + $20,000 + $300,000 − $260,000 = $240,000 

The buyer has already placed $180,000 in purchase orders for October delivery, so open-to-buy at the start of the month is: 

$240,000 − $0 received − $180,000 on order = $60,000 

That $60,000 is available for reorders, in-season chases or opportunistic buys. 

Step 2: Recalculating mid-month 

By October 15, $100,000 has sold against a mid-month plan of $90,000, about 11% ahead. Receipts of $140,000 have landed, and $40,000 remains on order. 

Because the category is selling faster than planned, the month will end with less stock than the plan wants unless more goods arrive. The buyer reforecasts October sales to $200,000 and recalculates: 

Revised planned purchases = $200,000 + $20,000 + $300,000 − $260,000 = $260,000 

Open-to-buy = $260,000 − $140,000 received − $40,000 on order = $80,000 

The buyer now has $80,000 of open-to-buy instead of $60,000, and the extra room came directly from selling faster than planned. Open-to-buy changes whenever sales diverge from plan, which is why it is recalculated through the month rather than set once. 

Step 3: Converting to cost 

With IMU at 55%, the mid-month figure at cost is: 

$80,000 × (1 − 0.55) = $36,000 

Why does open-to-buy matter more in fashion? 

Open-to-buy is used across retail, and fashion makes it harder to run for two reasons. The unit a buyer orders in is far finer than the unit the plan is set in, and long lead times commit the budget months before the goods arrive. The pressure on inventory is also high. Inventory days on hand reached an all-time high in 2024, 14% above pre-2020 averages, according to McKinsey and the Business of Fashion. 

Plans are set in value, orders are placed by size 

Open-to-buy is set in value, by category and month. Forecasts are usually made by style and color, and purchase orders are placed in units by style, color and size. A 2016 MIT thesis studying Nike found that forecasts were made at style and color level and split into sizes using historical size curves, and that forecast error grew at size level, most in the fringe sizes. Open-to-buy controls the total spend. How that spend is divided across sizes is a separate decision made inside the ceiling. 

Lead times commit open-to-buy months in advance 

Open-to-buy is managed by the month goods arrive, not the month orders are placed. For categories with long offshore lead times, an order for October delivery may commit October's open-to-buy months earlier, and by the time October arrives that commitment is fixed. 

This is why purchase order discipline matters alongside the calculation. A buyer who tracks on-order figures against each future month's open-to-buy can see the commitments already made. A buyer who does not has a false picture of how much room remains. 

How is open-to-buy managed during the season? 

Open-to-buy is a rolling control. Buyers and planners review it through the season, and what the number tells them depends on where sales and receipts stand. 

Four in-season scenarios 

Scenario What happened Effect on OTB Buyer action
Sales ahead of plan Goods selling faster than forecast OTB increases Chase winners, place reorders
Sales behind plan Goods selling slower than forecast OTB decreases Hold back commitments, bring markdowns forward
Receipts early Vendor delivered ahead of schedule OTB used sooner Adjust future-month commitments
Receipts late Vendor delivered behind schedule OTB looks available, but the goods are in transit Do not spend it; update the on-order date

Each scenario calls for a different response, and the OTB figure is the signal for it. 

Holding budget back for in-season chases 

Buyers commonly hold part of their open-to-buy back from pre-season commitments to keep room for in-season chases. When a style sells faster than planned, the buyer needs open-to-buy to reorder it. If the whole budget went on pre-season orders, there is no room to chase, and the result can be a stockout on a winning style. Holding budget back reduces the risk of being fully committed to a plan that turns out to be wrong in the first weeks of the season. 

Managing open-to-buy by category 

Open-to-buy is most useful when managed by category, because a department-level figure can hide imbalances. A women's apparel department might show $80,000 of open-to-buy in total, but if $70,000 of it sits in outerwear while knitwear is already overcommitted, the total is misleading. Category-level figures show where room exists before month-end results reveal the problem. 

What does a negative open-to-buy mean? 

A negative open-to-buy means the buyer has committed more than the plan allows for the period. Receipts and goods on order exceed what the sales and inventory plan can absorb, so excess stock arrives into a category that cannot sell it at full price. 

The cost is measurable. A 2018 survey of 200 US retail decision-makers by Coresight Research, sponsored by Celect, found that overbuying was the primary cause of about 30% of all markdowns. The same survey put total markdown costs at over $300 billion, more than 12% of US non-grocery sales. 

When open-to-buy goes negative, the buyer has three options: cancel or defer purchase orders where vendor terms allow, bring markdowns forward to clear existing stock, or revise the plan upward where there is a genuine trading reason. Revising the plan only to absorb the overcommitment makes the problem worse, because it raises the receipt ceiling without a sales forecast to support it. 

The markdown cost of overbuying is covered in more detail in our guide to stopping fashion markdown bleed. 

What does open-to-buy not cover? 

Open-to-buy is a buying control, and it depends on processes outside it. It uses a sales plan as an input but does not create one. The sales, markdown and inventory targets that feed it come from the merchandise financial plan, and setting those targets, along with the margin implications of carrying too much or too little stock, is covered in our guide to merchandise financial planning. 

Open-to-buy also stops at the value of what arrives. Distributing goods across stores by size and location is an allocation decision. And the on-order figure is only as accurate as the purchase order records behind it. If orders are entered late, amended without updating the system or kept in a separate tracker, the open-to-buy figure will be wrong. 

What does it take to run open-to-buy well? 

The formula is simple. Running it well in a growing fashion and apparel chain depends on the data behind it. 

A current merchandise financial plan. Open-to-buy is only as good as the sales, markdown and inventory targets that feed it. If the plan was set in February and has not been revised since, the October figure rests on a forecast that is months old. 

Accurate on-order data. On-order figures are a frequent source of error. Purchase orders need to be entered promptly, against the right delivery month. An order for October delivery recorded against November gives a false picture of how much room remains in October. 

Accurate receipt recording. Receipts need to be recorded against the correct period. Early and late deliveries both distort the figure if they are booked to the wrong month. 

Stuart Elborn, Head of Delivery Buying and Merchandising at Primark, describes how the chain uses Island Pacific SmartPlanning: "Island Pacific SmartPlanning provides an integrated planning solution for all our pre-season and in-season planning, store planning and line plans. The fast pace of our business means we needed a solution which is scalable, easy to use and delivers the right information to our users in order that they can make key merchandise decisions and invest Open to Buy in the right areas." 

For how merchandise planning sets the targets that feed open-to-buy, see Island Pacific's merchandise planning software. 

Frequently asked questions 

Is open-to-buy calculated at retail or at cost? 

Both. It is usually built at retail value, from the planned sales, markdown and inventory figures in the merchandise financial plan, then converted to cost using the initial markup percentage. Buyers place orders at cost, so the cost figure is what appears on purchase orders. Some retailers also track open-to-buy in units. 

How often is open-to-buy updated? 

Whenever actual sales or receipts move away from plan. In peak trading, buyers commonly review it weekly. In slower periods, a review every two weeks or monthly is common practice. The aim is for the figure to reflect current actuals. 

Is open-to-buy the same as cash available? 

No. Open-to-buy is a planning control, expressed at retail or cost, that tells a buyer how much they can receive in a period under the merchandise plan. Cash available is a finance measure of actual liquidity. A buyer can have open-to-buy remaining and no cash to spend, or cash available and no open-to-buy because the receipt plan is already full. 

What is the difference between open-to-buy and planned purchases? 

Planned purchases is the total value of goods a category needs to receive in a period to meet its sales, markdown and ending-inventory targets. Open-to-buy is what remains of that figure after goods already received and goods on order are subtracted. Planned purchases is the ceiling, and open-to-buy is the room left beneath it. 

Plan your buys from live figures 

If you run open-to-buy in a fashion, apparel, footwear or specialty chain and want to see how a connected planning system handles the calculation, book a demo with the Island Pacific team. 


Next
Next

What is the difference between Merchandise Planning and Inventory Management?